OE excellent elements from top first gear and aftermarket manufacturersThe best good quality at a fantastic value
I repaired my Sienna. regretably I also knicked my condenser messing with All those bottom brackets so I replaced that also. But many thanks for the help!
You will find a hole in the bumper to allow for the antifreeze to empty straight down, throughout the hole, and into your bucket. Place your huge pan underneath the drain after which you can open up it up. This really is what the drain plug seems like from your back aspect of your radiator:
This was the tricky component for me but I’m likely to make it uncomplicated in your case. I couldn’t high-quality Any one on the internet telling you how To accomplish this step-by-step. Listed here’s how to get it done…
Another thing to note is the fact behind the battery pan You will find there's “hook†where by the rod hooks on that clamps the battery down set up. The hole wherever the rod hooks into is situated here:
†By completing this repair you should place a notch with your belt and when another repair arrives, you’ll be extra assured about having the ability to get it done you.
Eliminate the bolts within the underneath aspect with the lower brackets on either side. I utilized a five/16th Socket.
I labeled mine with tape before I taken off them in order that I used to be selected as to which 1 goes back again on which nipple:
Step 11g: Disconnect another wiring harnesses you see linked to issues on The within on the bumper.
If there was any sand or leaves in it, You should definitely thoroughly clean it out Whilst you have it out with the car or truck and prior to deciding to reinstall it:
, which are a very good offer and so they stack up for easy storage. You could possibly most likely try this repair without having ramps but It will be quite limited crawling under your van devoid of that added space.
It is just pushed into a pair holes with the metal frame from the van and comes suitable out. Listed here’s the pile of sections I’ve taken off to date:
You must raise up the condenser to take a seat it on top check it out of the bracket(s) that happen to be now attached towards the radiator.
Set the overflow hose clamp back again in place–there’s a white line to indicate where it ought to go on OEM Toyota hoses. I utilised a couple zip ties to carry it in place due to the fact I broke mine.